Oddities
Contents
Try The New Virtual Machines!
As of 20:43, 22 January 2015 (EST), the login-teer machines are working again!
Unless you have to print from a PS to a PDF, you should try the new virtual machines - just type
ssh -XY netid@login-teer.oit.duke.edu
and that will take you to a Teer-like machine that should have no problems.
The rest of this page is for posting "strange" things that happen, particularly with the Teer machines. If we can get them explained and solved - great! If not - at least you will know you were not alone! The machines to avoid are given below.
Machines to Avoid as of 18:14, 22 January 2015 (EST)
Teer 04, 13, 15, 16, 18, 21, 22, 23, 27, 31, 32, 35, 36, 37, 41, 43
Not Responding
Check Ping Results to see which machines are not responding to hails. As of 18:14, 22 January 2015 (EST) it's 04, 26.
AFS Drive not connected (EGR103 does not exist)
When you try to cd to an AFS folder, it doesn't exist.
- Date(s): 1/14/2015-
- Machines: 9/4/14: 13, 16, 18, 21, 22, 23, 27, 31, 32, 35, 36, 41, 43
- Solution: Log in to a different machine...
Never gets past creating authority file
When you log in, after putting in a password, you never get a prompt.
- Date(s): 1/22/2015-
- Machines: 15, 37
- Solution: Log in to a different machine
Warnings / Other Things That Aren't Actually Problems
evince SettingsDaemon
When starting emacs, a strange error (or hundreds of them show up) saying:
** (evince:####): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
- Date(s): Starting two years ago, continuing on
- Machines: All Teer
- Solution: It still works...hit enter to get to a new command prompt but evince should be working
Xlib: extension missing
Occasionally, the error message comes up with graphical programs saying:
Xlib: extension "RANDR" missing on display "localhost:10.0".
- Date(s): Starting two years ago, continuing on
- Machines: All Teer
- Solution: The graphical programs still work...hit enter to get to a new command prompt but the graphical program should be working
Resolved
Never gets to a prompt
After you give your password, the Teer machine never gives you a prompt.
- Date(s): 9/5/2014, 1/14/2015-1/16/2015
- Resolved: 9/5/2014, 1/16/2015
- Machines 1: Teer 5
- Machines 2: Teer 9, 16
- Solution: Log in to a different machine...
MATLAB LAPACK Issue
Some people reported an error with LAPACK when using polyval on MATLAB. OIT confirmed this is a known bug with MathWorks Bug Report and they are working on getting the fix installed.
- Date(s): 9/2-mid-October
- Resolved: 9/5/2014 - patch pushed out to Teer machines by OIT
- Unresolved by observation on 9/8/2014...
- Re-resolved mid-October
- Machines: Teer 04, 12, 13, 25, 26 - but only some people, not all
- Solution: Log in to a different machine...
AFS Drive not connected (EGR103 does not exist)
When you try to cd to an AFS folder, it doesn't exist.
- Date(s): 9/4-??/2014
- Resolved: 9/28/2014
- Machines: 9/4/14: Teer 07, 41
- Solution: Log in to a different machine...
matlab command not found
On teer37, the matlab command is missing.
- Date(s): 9/2-4/2014
- Resolved: 9/2/2014
- Machines: Teer 37
- Solution: Log in to a different machine...
Password not accepted
Currently, teer03 is not accepting passwords correctly.
- Date(s): 9/2/2014
- Resolved: 9/4/2014
- Machines: Teer 03
- Solution: Log in to a different machine...
MATLAB R2013a vs. R2014a
Some people type matlab &
and an older version of MATLAB comes up.
- Date(s): 9/2/2014
- Resolved: 9/4/2014
- Machines: Teer 15, 27, 34
- Solution: Log in to a different machine...