EGR 103/DAQ Audio 2

From PrattWiki
(Redirected from EGR 53/DAQ Audio 2)
Jump to navigation Jump to search

See Audio 1 for more information about setting voltages and whatnot. Updated for Spring, 2011.

Notes

  • Use the same audio setup and volume instructions as found in EGR 103/DAQ Audio 1
  • Use the same process in EGR 103/DAQ Audio 1 and the handout for DAQ 3 for setting up the oscilloscope and such; the only difference is you want to set the maximum voltage to 0.25 V instead of 0.4 V.
  • When downloading MyChirp.mat, the computer may add a .txt to it. In the MATLAB "Current Directory" window, you should rename it back to MyChirp.mat

Troubleshooting

"winsound" is the only option on the oscilloscope!

You most likely logged in with your own OIT account rather than the local one. Click the Windows Start button - if it says anything other than mrglocal, logout and log in using mrglocal with a password of p1p2dell - be sure to log in to this computer. If you are on mrglocal already, restart the computer. If that doesn't work, get Dr. G.


Questions

Post your questions by editing the discussion page of this article. Edit the page, then scroll to the bottom and add a question by putting in the characters *{{Q}}, followed by your question and finally your signature (with four tildes, i.e. ~~~~). Using the {{Q}} will automatically put the page in the category of pages with questions - other editors hoping to help out can then go to that category page to see where the questions are. See the page for Template:Q for details and examples.

External Links

References